Mondraker Zendit RR Bike
-
RA price match promise
-
Pay later with
,
and
Pickup available at RA Cycles - Brooklyn
Usually ready in 24 hours
Questions about this product?
Questions about this product?
What size do I need?
What size do I need?
Schedule a Bike Fit in Walnut Creek, CA.
Schedule a Bike Fit in Brooklyn, NY. Please call 718-636-5242
Mondraker Zendit RR Bike
Mondraker Zendit RR Bike Info
The Mondraker Zendit RR Bike puts the same Avinox M2S motor and full carbon Zendit chassis into the hands of more riders. Where the XR spends on carbon wheels and the top tier of every component category, the RR makes deliberate choices — Fox Factory Kashima suspension on both ends, SRAM's wireless T-Type drivetrain, and SRAM Maven 4-piston brakes — that keep the ride character of the platform intact while landing at a more accessible price. The motor and battery are identical. The geometry is identical. The frame is identical. What changes is where the build spec sits within each component family.
The Avinox M2S drive system at the center of the RR delivers 130Nm of torque in standard modes, rising to 150Nm with a peak of 1,300 watts in Boost mode for up to 60 seconds. This is the same motor found in the XR — Mondraker's own unit, built around the Zendit frame from the outset rather than integrated after the fact. The 800Wh battery maintains 80% capacity after 500 charge cycles, and five riding modes (Eco, Auto, Trail, Turbo, Boost) give you full control over how you deploy that power. The Avinox DP100 display and BC100 wireless controller handle system management from the bar.
The suspension is Fox Factory Kashima across both ends, with the Fox 38 Float GRIP X2 Factory Kashima up front delivering 170mm of travel with full high and low-speed compression and rebound tuning. The Fox Float X Factory Kashima EVOL LV handles the rear, tuned to the Zendit's updated Zero Suspension kinematics — the same revised anti-squat (~105%) and anti-rise (~99%) figures that make the platform efficient on climbs and composed under braking. The mullet wheel configuration ships standard: 29" front for rolling speed, 27.5" rear for agility, with a flip-chip available to run full 29" without affecting head angle or bottom bracket height. DT Swiss Hybrid H 1900 Spline alloy wheels with 30mm internal width and tubeless-ready construction handle the rolling duties, wrapped in Maxxis Assegai and Minion DHR II rubber in 3C Maxx Grip compound.
Specs at a Glance
- Frame: Zendit Stealth Air full Carbon / Updated Zero Suspension System / Forward Geometry / 165mm rear travel / internal battery / UDH
- Motor: Avinox M2S — 130Nm (150Nm Boost) / 1,300W peak / 250W nominal / 5 riding modes
- Battery: Avinox 800Wh integrated / 80% capacity after 500 charge cycles
- Fork: Fox 38 Float GRIP X2 Factory Kashima / 170mm travel / Boost 15x110mm
- Rear shock: Fox Float X Factory Kashima EVOL LV 205x65mm / Zendit-specific tune
- Drivetrain: SRAM S1000 Eagle AXS T-Type / e*thirteen Helix Race Alloy crankset / 36T chainring / 10-52 cassette
- Brakes: SRAM Maven Base 4-piston / SRAM Centerline 200mm rotors
- Dropper: Onoff Pija / 31.6mm / 1X remote lever (140–210mm travel by size)
- Wheels: DT Swiss Hybrid H 1900 Spline alloy / 30mm internal / tubeless ready
- Tires: Maxxis Assegai 29x2.5 WT 3C Maxx Grip EXO+ (front) / Maxxis Minion DHR II 27.5x2.5 WT 3C Maxx Grip DD (rear)
- Handlebar: Onoff S6 1.0 7050 Alloy / 800mm wide
- Display: Avinox DP100 / BC100 wireless controller
- Geometry: 63.5° head angle / 73.5° seat angle / 440–520mm reach (S–XL)
- Sizes: S, M, ML, L, XL
- Colors: Vortex Grey, Saturn
Design Benefits
- Same motor and battery as the XR — the Avinox M2S with 130Nm standard / 150Nm Boost and 800Wh battery is spec'd identically across the Zendit range; the RR doesn't compromise where it matters most
- Fox Factory Kashima on both ends — the Fox 38 GRIP X2 Factory Kashima fork and Fox Float X Factory Kashima rear shock are both factory-grade, full-adjustment units tuned to the Zendit's suspension kinematics
- SRAM S1000 Eagle AXS T-Type — wireless, T-Type chain management, and a 10-52 cassette give you the reliability and gear range of the top AXS T-Type platform at a step below the X0 tier
- SRAM Maven Base 4-piston brakes — four-piston calipers at this price point deliver serious stopping power; the Base tier shares the same caliper architecture as the Ultimate, with differences in lever feel and finishing
- Mullet setup with full 29" compatibility — the standard 29/27.5 configuration optimizes climbing and descending performance, while the lower flip-chip converts to full 29" without altering geometry
- Identical carbon chassis and geometry — every RR rides on the same Zendit Stealth Air carbon frame with Forward Geometry and the Updated Zero Suspension System as the XR; the character of the platform doesn't change with spec tier
Final Take
The Zendit RR is the right entry point into the Zendit platform for riders who want the Avinox M2S motor and Mondraker's carbon e-enduro chassis without stepping up to carbon wheels and XR-tier components across the board. Fox Factory Kashima suspension, wireless SRAM T-Type drivetrain, and four-piston Maven brakes make this a genuinely capable build — not a watered-down version of the top-spec model. At $10,699, it delivers the core of what makes the Zendit exceptional.
Mondraker Zendit RR Bike - Specifications
*Specifications are subject to change.
Mondraker Zendit RR Bike Geometry
The RA Perspective
The RA Black Experience - Transforming How You Buy a Bike
The R&A Transporter Bike Box
Shipping bikes can be tricky. They are big and bulky but delicate. Shipping your passion / investment is nothing we take lightly. We go through great detail to ensure your new ride will get to you in perfect condition.
So you've purchased the bike of your dreams! We've put together this video to outline the R&A concept of shipping bikes and the steps we take to get you your new bike in perfect condition. It will show you the careful steps we take to assemble your bike to make it as easy as possible for you to get your bike on the road when you receive it. Ready to ride. It will also show you the tips and tricks of removing all of your parts in the most careful way to ensure your riding as quickly as possible.
