F3 Formmount Camera/Light Component Mount

F3 Formmount Camera/Light Component Mount Info

F3 Cycling knows that some folks like to have a forward-mounted camera or light on their bike and don’t like it cluttering the bars. Their solution is to add a Camera/Light component mount to the underside of their FormMount Computer Mount.

First you need to procure the FormMount computer mount, which we carry. Then, you use an Allen key to unscrew the two cradle bolts on the underside of the mount. Remove the FormMount cradle and replace it with the Camera/Light Mount. Install your light or camera and go.

The only major limiter for installing this is the distance between the stem bolts. This mount works with the bolts as close as 16mm and as far apart as 41mm. Compatible stems also need to use M5 bolts to secure the faceplate and have a parallel bolt axis. When installing this, you’re removing two M5 bolts from your current faceplate and installing one set of FormMount’s bolts in their place.

Finally, if and when you decide you don’t want to carry the light or camera around any more, you can just use the two bolts to take off this mount and reinstall the original cradle. A few grams saved both in aero drag and weight.