CeramicSpeed Ceramic Wheel Kits - DT Swiss 240
Benefits of buying from RA Cycles:
-
RA price match promise
-
Pay later with
and
Couldn't load pickup availability
CeramicSpeed Ceramic Wheel Kits - DT Swiss 240
CeramicSpeed Ceramic Wheel Kits - DT Swiss 240 Info
When you want your DT Swiss 240-hubbed wheels, or your Reynolds, or your Enves, or your Syncros, or any number of brands to go faster than they already do, pull the stock bearings and install this set of six CeramicSpeed Ceramic Bearings into the innards. CS calls this kit DT Swiss-1
The bearings, two for the front hub, two for the rear hub, two for the cassette body, are designed for DT Swiss 240 road hubs. These hubs are utilized by Enve, Reynolds, Syncros, and many other wheel manufacturers because of they are light, strong, durable, and have a great pawl mechanism. The bearings are excellent. But CeramicSpeed’s are better. Much better.
CeramicSpeed utilizes Grade 3 Silicon Nitride balls that possess the best possible surface finish and roundness. In testing, the balls are 400% smoother, 128% harder, and 58% lighter than standard steel balls found in most bike components. They’re more than 100% smoother and 15% harder than standard ceramic balls. The balls are installed into hardened steel races in dust-free clean rooms and then checked again before assembly is complete. Not only is low friction the result, but so is increased bearing life. Like three to five times longer than standard bearings.
If you replace all your bike’s bearings with CeramicSpeed, you could be looking at a savings of 25 seconds in 40km if you’re riding at 48kph. The savings goes up to two minutes if you’re riding at 32kph. Extend that to an Ironman-length ride, and the savings could vary from 1:50, if you’re going 48kph to nine minutes if you’re going 32kph.
Another step they take in assuring the lowest-possible frictional drag is using grease they designed as lubricant. It comes in the bearings and a syringe comes with the bearings as well.
The kit comes with the six bearings, seals, grease, and sticker sheet. CeramicSpeed recommends adding grease and mounting seals before installation
This CeramicSpeed DT Swiss 240 Ceramic Bearing kit reduces friction and increases durability to any wheel that features the 240 hub in the middle of everything.
