Silca Chain Stripper and Wax Prep Bundle

The Silca Chain Stripper and Wax Prep Bundle was designed to solve a specific problem: factory grease and standard chain lubes repel wax, which means all the friction-reduction benefits of wax lubrication never reach the rollers where it matters. This two-product system strips that barrier away and replaces it with a wax adhesion primer — all in a single prep session that takes less than 10 minutes, without removing the chain from your bike.

The Chain Stripper is a highly concentrated biodegradable degreaser. Apply a drop to each roller while backpedaling, let it soak for five minutes, backpedal ten revolutions, repeat, then rinse with water. The Chain Coating goes on last — one drop per link, left to cure — and functions as a primer that locks wax into the chain's contact points. SILCA claims up to 30% longer chain life with the system compared to conventional lubrication, a figure tied to reduced wear at the roller-pin interface once wax is properly bonded.

Silca Chain Stripper and Wax Specs at a Glance

• Two-product bundle: Chain Stripper degreaser and Chain Coating adhesion primer
• Biodegradable, highly concentrated degreaser formula
• On-bike application — no chain removal required
• Full prep time: under 10 minutes
• Designed to extend chain life by up to 30% (manufacturer claim)